Introduction to Fixed Asset Management

There are obvious benefits from implementing and maintaining a record and control over assets. Savings can be obtained from being able to both see current asset deployment and thenby maximizing their use. Monitoring assets will reduce unauthorized use or misappropriation and insure employees leaving a firm return assets under their control. In some cases a system is mandated by government regulations, terms of lending, public grant terms, insurance terms etc. One person can maintain and manage all fixed assets of a business if they have software to assist them. Computer systems and software available reduce complexity, save time and prevent mistakes. Why use an asset management software program?

While paper and pencil methods can be used, software programs assist in the recording, maintenance and auditing of assets. This saves time and gives a clear picture of assets since sorting and viewing in different ways is quick and easy.

The most basic 'solution' would be using a spreadsheet program such as excel. Even after migrating to software specifically designed for asset management there are times that a spreadsheet program may continue to be useful.

What is an Asset?

What you call an asset often depends upon your business activities. The first thing that comes to mind is fixed assets such as computers, production equipment, office furnishings etc. You might even wish to consider employees as assets or even service and maintenance contracts. A flexible asset management software program can provide a way to track many things most of us would not consider to be assets.

What are my first steps in setting up a system or 'solution'?

1: Decide what assets will be managed.

The more assets the more work in setting up your system. Limiting assets to only those over a certain dollar value is a good idea.

2: Deciding what characteristics of assets it is important to record within the software.

Your choices will not only have an effect upon the amount of work required but also the amount to which you can manipulate and view asset information by sorting on asset information field or combination of fields.

For example if you setup a field for 'location' then you can sort data to see what assets are in each location. If you also have a field for 'type' or 'class' then you could further sort and display to show only certain types of assets such as computers at one or more location.

As in every aspect of life one has to make tough choices between what is ideal and what is feasible. Your choices will have an effect upon data data when new assets arrive as well as collecting information about existing assets. Choices you make will also have a bearing upon your choice of software since some may not handle everything you want. One such a limitation is found within the AssetTrakker Pro software program. TrackitSoftware does not provide a method of tracking depreciation because it was felt this added too much complexity requiring the collecting and maintaining of a lot more data. Additionally, they felt, handling depreciation requires superior knowledge of government rules and regulations beyond the expertise of the very people that stand to benefit most from asset management. Accounting departments already calculate and account for depreciation. * Some software does promote depreciation calculation but only limited functionality that in most cases is not the way regulations demand.

Some help!

Below is a listing of Asset Attributes 'fields' for your consideration. You will not want to use all of them for your own 'solution' and may well have additional ones you need.

Asset #: The key identification reference used to track assets. They can be straight numbers or a number with an alphabet prefix. (0001 or A001). This number is used for audit purposes and for cross-reference.

Make: Manufacturer

Model: Use when arranging service or buying parts. Use as allowed grouping by model type.

Serial #: Specific asset identification. Needed when making warranty or insurance claims.

Cost to Repl .: Estimate the cost of replacing an asset. Useful for planning, risk assessment and insurance.

Cross Ref. #: Reference other asset number or tie together group of assets.

Type: Can be used for general grouping such as furniture, computer, shipping, etc.

Condition: Helpful to see what is likely to require replacement or decide on service needs.

Description: Other detail in addition to make, model, and serial number.

Memo: Additional information about the asset. If a computer you might want to list details of the hardware configuration or even the programs installed on it.

Department: This is helpful for sorting assets by department to assist in auditing.

Location: Good field to have so that a search / sort can give you a clear view of where assets are located.

Used by: Necessary if you have assets in the personal possession of an employee and / or assets off business concessions.

Date Assigned: Useful if assets are moved around or for telling how long an asset has been at its current location.

Expected EOL: The anticipated date when the asset will no longer be useful.

Funded by: Source of funds if provided by Bond Issue, or outside funds (loan) or a grant.

Cost: Total cost of acquiring an asset.

Date Acquired: Helps give some idea when replacement may be required.

Disposed: Indicates an asset has been disposed of.

Disposed Date: Date asset was disposed of.

Business Use%: Used if an asset is not used full time by the business to break down asset use. Not for everyone, but a field that imagination might find an indispensable use for.

OUT: Used for Tool / Equipment Tracking,

Taken By / In From: Used for Tool / Equipment Tracking to indicate who is taking or returning item.

Date Due: Used for Tool / Equipment Tracking to show when an asset is due back.

Recovered Value: Net proceeds of the disposal of an asset.

Disposed Detail: Notes on how and where an asset was treated of.

Warranty: Indicates if asset is covered by a warranty or could be used if covered by a service / maintenance contract.

Warranty Expiry: It is useful to see what expiries are approaching for tracking maintenance or service agreements. Helps prevent paying for service covered by warranty as well as prompting the repair of items before expiration.

Image: Can assist in asset identification or where 'look' is an important feature. Useful if insurance claim ever made.

Value: Could be amount the asset is insured for. Risk exposure control.

Leased: Helps keep track of Leased vs Owned assets.

Lease End: Used to warn when assets have to be replaced or the lease has to be renewed according to the terms of the lease.

Lease Start: Commencement date of lease on leased equipment.

Lease Co: The name of the company from which an asset is leased.

Audit Date: This column records the date the batch scans of assets were made for audit purposes.

Auditor: Record the name of the person who performed the audit.

What next?

By now you have a good idea of ​​what asset information you want to track. Before looking at the various software packages available you should consider how many people will be entering data and how many will be accessing the data. For a smaller organization it is likely that just one person will be involved but in larger firms despite a number will wish to participate. Your situation could require purchasing more than one software license and the software must support multiple users.

Use a Barcode Scanner?

A barcode scanner can be used to speed data entry and auditing. This will add to the cost and most lower priced software packages offer limited support for barcode scanners. If properly incorporated into software a scanner can provide excellent value and save a lot of time, particularly for annual audit purposes.

Below are outlined the types of barcode scanners used with asset management software.

A 'dumb' tethered ccd scanner is cheapest and purchased for around $ 70. This can only be used when plugged into the computer and acts just to a keyboard in that you scan a barcode and it is put into whatever cell or space you are in.

A 'laser' tethered scanner is more money but will be able to scan smaller barcodes and sometimes have a defect field of view (easier to scan a barcode quickly).

A ccd or laser scanner which has built in memory so scans can be made and then the scanner can be brought back and plugged into a computer, and those scans uploaded. This is extremely useful for audit purposes. For maximum utility your software should be optimized to take advantage of this 'batch' memory capability. A capable unit can be obtained for around $ 150.

A laser scanner with internal memory, as well as an input screen and keys, means that after scanning a barcode you can add additional information. These are more expensive and again their use has to be integrated into your management software. While prices are coming down you are looking at units in the pocket pc price range plus scanner cost. It is usual for software utilizing these units to also, for some reason, be priced higher.

Asset Management Software

The range of prices for asset management software is $ 200 to $ 10,000 and all require you to do the entry of existing asset data as well as some setting up for your requirements. Some offer telephone advice at additional cost but hands on assistance only comes with expensive packages (this level of software requires expensive sales force and marketing expense so possibly their price, for the features provided, may seem high).

Purchasing Criteria a lot of people seem to use. You may have more.

1: Price 2: Ease of implementation of system 3: Ease of use 4: Ability to fit the business 5: Functionality 6: Potential to handle growth

What you can obtain for a reasonable price

A program with full relational database, such as MS SQL Server Express, or open source database. Today there is no reason to set for less power or quality. Microsoft provides their SQL 2005 'Express' DB version at no cost.

A program that allows you to attach images of assets. While not necessary for everyone it is something that someday you might want to use.

A program that integrates the use of inexpensive 'batch' memory barcode scanners because, if not now, at some point in the future such an accessory will save time and money. Used in auditing it assures an asset was actually seen as barcode had to be scanned.

A program that will permit the management of 10,000+ assets. With decent memory in your computer and a fast full relational database engine there is not much of a limitation anymore and while certain functions may slow down a bit even a low cost program should handle over 10,000 assets.

A program that is flexible so you can take advantage of features later instead of having to implement everything at once.

* If more than one person is to be given access to the database then you should ensure that different levels of access can be set for different users to prevent unauthorized changes to data.

What you can get but not cheaply.

A program that integrates directly into your current accounting system.

A program that has full professional depreciation calculations.

A program that runs directly off your company server (lower cost software runs off workstations and while a central database can be located on your server and accessed by individual workstations this is not the same as complete software being server based with applets on workstations.

Hand holding and in house training to get your system up and running. There are firms that will sit down with you and ask you all the right questions, set up your software, audit and list all your assets and then train your staff how to operate and maintain your 'solution'. Most, to my knowledge, will recommend a mid to high priced software because it is easier to sell (commission higher as well) and easier for them to install due to their familiarity with it.

Nuts and Bolts

Gathering your Asset Information How you perform this step depends upon your situation. In our discussion below we assume you do not have existing asset information, in an existing excel spreadsheet or other format. If you do then you would save work by exporting / importing that data into your asset management software.

Starting your Asset Listing and Numbering from Scratch

This is an advantage because you are not limited by inherited constraints. Of course it is more work, as you can not just load in existing asset information but have to collect everything yourself.

Collecting asset information is time consuming. Getting this information accurately, with as little work as possible is important. Thinking about how to do the job and planning will help make this big job easier.

The following is how I suggest doing this but you may have your own, sometimes better plan.

Create data entry sheets that you will have people write in information about assets under their control. Your asset management software may create these or you could make up an excel spreadsheet to obtain them.

Try and obtain some 'buy in' from the department or location manager with control over assets. The closer to the asset you can allocate some responsibility the better that asset will be controlled. 'It's my department's asset' is more powerful an incentive than 'it's IT Dept's asset'.

Final steps

After entering data, that your co-operative managers helped you obtain, it is time to work with that data within your asset management software. It should not take long to become familiar with how it can present information to you on screen and in reports.

Now sit back and enjoy how easy it is to manage your assets.

Posted in general | Comments Off on Introduction to Fixed Asset Management

Application Software in Business Activities

Business is any activity undertaken by an individual or a group of person with an intention to make profits. A business engages in various activities like planning of resource, scheduling of activities, coordinating and other managerial activities. All these have to be completed in time in order to generate maximum profit in the production. Prospective entrepreneurs should adhere to these objectives.

Much of business time is put waste when it handles its tasks through the use manual system. This necessitates to the use of the software, an automated means which is efficient-oriented. Examples of the software in business application include the Decision Support System, Transaction Processing system and Management Information System. They can be largely used in resource planning where an enterprise defines way to achievement.

Collaborative resource planning software provides the business people with adequate and reliable information. Marketing information and bureaucracy of the enterprise is unambiguous. Previous methods that contributed to the failures can be fully noted. This enables the enterprise to opt to use other successful means in use elsewhere. An efficient resource planning software helps you to generate and retrieve information about resource allocation in form of detailed niche reports. As a result, time as a resource is much conserved and can be used in other productive areas.

Boundaries are clearing defined by the software. The business is expected to work towards the laid limits by the legal authority, operational, technical, economic and social feasibility. Beyond the predetermined extents, no productive operation can be encountered.

Scheduling of activities is best in practice via use of the software. The order and the way in which operation is accurately developed by use of the program, this results into application of qualitative business techniques, where there is matching of skills and jobs to done. The enterprise standards of performance are maintained. Cases of underemployment or over employment are eradicated. In turn, employees’ are encouraged to exercise creativity and innovation in right of their propelling positions, and hence works towards achievement of objectives of the business.

Planning software makes efficient forecasting of resources. Unknown future is determined prior. Situations like inflation, competition increases government provision of subsidies and technological changes can be adequately known. The fallout is to relay strategies to deal with upcoming challenging matters.

Top echelons (management) benefits significantly in software application. Executives’ unstructured decisions are accurately established. They rapidly derive information from the software. For example, decisions on where to establish a new firm or a branch, whether there is funds to finance multiple projects.

Management need to store information in reliable source (in software). This is used for swift evaluation of business performance. They can decide to reward the best performing employees based on the results retrieved from the software. This motivates employees to work zeal and confidence. Their individuals objectives are harmonized to entire business objectives.

Managers use software to control the progress of activities. Those deviating from the predetermined plans can be precisely noted. Management can also rely on software for marketing of its products. Research on business competition like advertisement and efficient market penetration means is done in detail.

In conclusion, software suitable for effective planning of the business operations, scheduling of activities and other managerial activities. Without use of software, a business is considered to be running behind technology and operating at obsolete level.

Posted in general | Comments Off on Application Software in Business Activities

10 Top Reasons Why I Have to Upgrade My Computer

The rate at which technology is improving is very fast and in the time you get comfortable with the computer hardware you have bought, several new and improved models appear in the market. While some people prefer to keep their computers state of the art, most of us have a 'If it is not broken, do not fix it' attitude when it comes to upgrading or replacing our computers.

This is a strategy that could prove expensive in the long run. It is always better to upgrade your computer on a regular basis, especially if you have had it for over 2-3 years. Even if your computer has had a large trouble-free existence, you really need to consider periodic upgrades and here are the reasons why you must dos so:

1. Increase in Processing Speed ​​- This is one place where you really get to notice an improvement in performance. If you are upgrading from a Celeron 433MHz processor to a Pentium 4 1.6GHz, you would really notice the difference in performance!

2. Faster Memory Access – Improvements in CPU speed are typically accommodated by improvements in the speed at which data transfer occurs between the CPU and RAM. This is another area that provides an improvement in performance.

3. Size and Capacity improvements – Technology drives a reduction in component size coupled with an increase in storage capacity. This means that a RAM card or hard disk of the similar size as the older ones in your computer could have double the capacity!

4. Software Compatibility – Many of the new software packages you may wish to use in order to improve your productivity or entertainment experience may not function well on you old computer. It is better to upgrade your computer to enjoy the benefits of new software fully.

5. Obsolescence of Hardware – As your hardware gets older; Getting a replacement will get more difficult once manufacturers start phasing out the production. With improvement in technology, the older hardware becomes cheaper initially and becomes expensive as supply dries up.

6. Technical Support Issues – Many manufacturers stop providing technical support for older components as they cease production. The older your computer gets, the harder it is to find help in fixing it when it malfunctions.

7. Development of New Hardware – New hardware products appear in the market frequently that revolutionize your computer experience and are based on newly developed technology. The chances of your old computer supporting new devices are very low.

8. Faster Devices – Your old computer may not be in a position to accommodate the speed at which the new devices communicate.

9. New, Fast Communication Protocols – You may not be able to implement new or faster communication protocols in your old computer because the hardware is unable to support them.

10. Operating System and File Format – Your old hardware may not be able to run newer operating systems and some of the file formats may not be supported.

Posted in general | Comments Off on 10 Top Reasons Why I Have to Upgrade My Computer

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software

Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware

Examples Of Spyware And What They Are

Spyware is a general term used to describe software that performs certain behaviors such as advertising, collecting personal information, or changing the configuration of your computer, generally without appropriately obtaining your consent first.

Spyware is often associated with software that displays advertisements (called adware) or software that tracks personal or sensitive information.

That does not mean all software that provides ads or tracks your online activities is bad. For example, you might sign up for a free music service, but you “pay” for the service by agreeing to receive targeted ads. If you understand the terms and agree to them, you may have decided that it is a fair tradeoff. You might also agree to let the company track your online activities to determine which ads to show you.

Other kinds of Spyware make changes to your computer that can be annoying and can cause your computer slow down or crash.

These programs can change your Web browsers home page or search page, or add additional components to your browser you don’t need or want. These programs also make it very difficult for you to change your settings back to the way you originally had them.

The key in all cases is whether or not you (or someone who uses your computer) understand what the software will do and have agreed to install the software on your computer.

There are a number of ways Spyware or other unwanted software can get on your computer. A common trick is to covertly install the software during the installation of other software you want such as a music or video file sharing program.

Any software that covertly gathers user information through the user’s Internet connection without his or her knowledge, usually for advertising purposes. Spyware applications are typically bundled as a hidden component of freeware or shareware programs that can be downloaded from the Internet; however, it should be noted that the majority of shareware and freeware applications do not come with SpyWare. Once installed, the Spyware monitors user activity on the Internet and transmits that information in the background to someone else. Spyware can also gather information about e-mail addresses and even passwords and credit card numbers

Aside from the questions of ethics and privacy, SpyWare steals from the user by using the computer’s memory resources and also by eating bandwidth as it sends information back to the spy ware’s home base via the user’s Internet connection. Because SpyWare is using memory and system resources, the applications running in the background can lead to system crashes or general system instability.

Because SpyWare exists as independent executable programs, they have the ability to monitor keystrokes, scan files on the hard drive, snoop other applications, such as chat programs or word processors, install other SpyWare programs, read cookies, change the default home page on the Web browser, consistently relaying this information back to the SpyWare author who will either use it for advertising/marketing purposes or sell the information to another party.

Licensing agreements that accompany software downloads sometimes warn the user that a SpyWare program will be installed along with the requested software, but the licensing agreements may not always be read completely because the notice of a SpyWare installation is often couched in obtuse, hard-to-read legal disclaimers.

Examples of SpyWare

These common SpyWare programs illustrate the diversity of behaviors found in these attacks. Note that as with computer viruses, researchers give names to SpyWare programs which may not be used by their creators. Programs may be grouped into “families” based not on shared program code, but on common behaviors, or by “following the money” of apparent financial or business connections. For instance, a number of the SpyWare programs distributed by Claria are collectively known as “Gator”. Likewise, programs which are frequently installed together may be described as parts of the same SpyWare package, even if they function separately.

o CoolWebSearch, a group of programs, takes advantage of Internet Explorer vulnerabilities. The package directs traffic to advertisements on Web sites including coolwebsearch.com. It displays pop-up ads, rewrites search engine results, and alters the infected computer’s hosts file to direct DNS lookups to these sites.

o Internet Optimizer, also known as DyFuCa, redirects Internet Explorer error pages to advertising. When users follow a broken link or enter an erroneous URL, they see a page of advertisements. However, because password-protected Web sites (HTTP Basic authentication) use the same mechanism as HTTP errors, Internet Optimizer makes it impossible for the user to access password-protected sites.

o Zango (formerly 180 Solutions) transmits detailed information to advertisers about the Web sites which users visit. It also alters HTTP requests for affiliate advertisements linked from a Web site, so that the advertisements make unearned profit for the 180 Solutions Company. It opens pop-up ads that cover over the Web sites of competing companies.

o HuntBar, aka WinTools or Adware,WebSearch was installed by an ActiveX drive-by download at affiliate Web sites, or by advertisements displayed by other SpyWare programs-an example of how SpyWare can install more SpyWare. These programs add toolbars to IE, track aggregate browsing behavior, redirect affiliate references, and display advertisements.

oZlob Trojan or just Zlob, Downloads itself to your computer via ActiveX codec and reports information back to Control Server. Some information can be as your search history, the Websites you visited, and even Key Strokes.

Posted in general | Comments Off on Examples Of Spyware And What They Are

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

A system optimizer is a software designed to maintain the performance of your computer, fix software related problems and keep your computer stable and secure. The need of a system optimizer software in Microsoft Windows7 operating system is high. This is because Windows 7 itself is unable to maintain all the mentioned aspects without the help of third-party products.

We are going to learn what exactly Windows 7 optimizer software is.

The best Windows 7 optimizer software shall include all the following features:

1. Registry Cleaner to fix the registry related issues

2. System Cleaner to clean unnecessary stuff and free-up the disk space

3. Registry Defragmenter to defrag the system registry

4. Startup Manager to control the programs running when you turn on your computer

5. Backup & Restore feature to restore unfavourable registry changes

“Registry Cleaner” to Fix the Registry Related Issues

Windows Registry is a vital component in Microsoft Windows 7. It contains information stored by your operating system and installed software. For example, the default settings, changes you made to your computer, system information, runtime data, etc. are stored.

Registry Cleaner is a software that finds the junk entries in the registry, and repairs them as far as possible. Unfortunately, Windows 7 does not include a built-in registry cleaner. The registry cleaner software included in the best Windows 7 optimizer lets you scan the genuine registry problems and correct them. It thereby helps avoiding many runtime errors and problems, such as, File Not Found, etc.

“System Cleaner” to Clean Unnecessary Stuff and Free-Up the Disk Space

A System Cleaner software lets you find the files and stuff that have unnecessarily occupied the hard disk space.

The tasks, like installing a program, uninstalling, repairing or updating the existing programs, and even just running the installed programs many times create temporary files, log files that need not be kept after the corresponding operation is performed. Sadly, many programs do not itself delete such files and stuff and thus your hard disk space is used for such unproductive stuff. Using a system cleaner software included in best Windows 7 optimizer, you can easily and safely delete such temporary stuff.

“Registry Defragmenter” to Defrag the System Registry

You know the importance of the registry in Windows 7 operating system, as already discussed. The continuous access of a number of programs to the registry results in its fragmentation. It reduces the system performance and freezes your computer.

The best Windows 7 optimizer software includes a registry defragmenter that enables analyzing the registry fragmentation and afterwards defrags it. A reboot is required to perform this process and all other running programs and services must be terminated.

“Startup Manager” to Control the Programs when you Turn on your Computer

Running too many programs at the Windows startup, results in system freezing and slow performance. A Startup Manager, included in best Windows 7 optimizer, lets you monitor and control the programs that run each time your computer is started. It lets you disable or delete the unwanted program entries and enable only those who are necessary.

Backup & Restore Feature to Restore the Unfavourable Registry

While doing all the above steps, care must be taken that you have followed some precautionary measures first, so that any unfavourable registry change can be later restored and unwilling situations can be easily avoided. The best Windows 7 optimizer should include such a feature.

Best Windows 7 Optimizer Recommended by Worldwide Experts

Posted in general | Comments Off on Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?